French distributor ofTUFO

HomeRoadElite Hi-Composite Carbon

» Elite Hi-Composite Carbon

The Hi-Composite Carbon reworked in 28 mm: supple 210/375 TPI casing, Low Modulus and Grip Silica compounds, Vectran barrier.

Elite Hi-Composite Carbon — Black
Tubular28 mmNew for 2025

The Hi-Composite Carbon reworked in 28 mm: supple 210/375 TPI casing, Low Modulus and Grip Silica compounds, Vectran barrier.

The Elite version keeps the tread that made the Hi-Composite Carbon's reputation and changes everything else: a much more supple 210/375 TPI casing, a Low Modulus compound that follows the road, a Grip Silica tread for the wet and a Vectran barrier. A 28 mm tubular for racing and rough roads.

  • 28 mm, 280 g
  • Vectran barrier
  • Low Modulus and Grip Silica compounds
  • Training
  • Racing
  • Durability
  • Protection
  • Comfort
  • Lightness

The Tufo technology in this model

  • Vectran barrier

    The toughest material in the Tufo catalogue: a Vectran ply, a liquid-crystal polymer five times stronger than steel at equal section, against punctures, cuts and blowouts.

  • Low Modulus compound

    Low modulus and high tensile strength: a supple compound that follows the ground, designed for road and track.

  • Grip Silica compound

    Tread compound with nanostructured silica, tuned for each discipline. Its strength is grip, especially in the rain.

  • Rubber puncture strip

    A layer of rubber laid under the tread: whatever passes through the rubber stops there before reaching the casing. It adds to the model's puncture barrier, it does not replace it. Tufo calls it the “protective rubber ply”.

In detail

Elite Hi-Composite Carbon, in a few words

What it does

The Elite Hi-Composite Carbon keeps the tread that made the model a success and changes everything underneath. It is a 28 mm tubular designed for racing on worn roads and the classics: where a narrow, hard tubular loses time bouncing from one flaw to the next.

The casing

It goes from 120/240 to 210/375 TPI. The tubular becomes much more supple: it absorbs instead of bouncing, which means both comfort and speed retained on a poor surface. That is the principle of the whole Elite series.

The compounds and the protection

A softer Low Modulus compound that follows the roughness of the road; a Grip Silica tread for wet grip; a Vectran barrier under the tread. 280 g in 28 mm, 4.5 to 8 bar.

Sizes, prices and availability

Elite Hi-Composite Carbon — 1 version, 2 variants

ModelSizeWeightTPIPressureColourvelox.fr priceStock
Elite Hi-Composite Carbon 28 28" × 28 mm
28-622
280 g210/3754.5 – 8 bar Black €60.90 Buy
28" × 28 mm
28-622
280 g210/3754.5 – 8 bar Black/Tan €60.90 Buy